In N1MM+, use the macro {CAT1ASC KY text;} to send "text". Spaces and ;
are significant - see the N1MM+ on-line documentation and the K3/KX3
Programmer's Manual.
You can insert N1MM substitution macros like #, * and ! as long as the
total length of the text to be sent stays below 24 characters. I believe
you can also insert control characters by enclosing the hex code in
angle brackets, e.g. <0D> for a CR character, etc.
I have never tried this next, but I believe you can do something similar
from DXLab Suite's WinWarbler by using the External Modem tab in the
Config window and setting the Model to Xcvr Ctrl App. Commander must be
running for this to work. There may be other configuration settings that
are needed along with this.
WinWarbler also has a radio control macro similar to the N1MM+ {CAT1ASC}
macro that could be used in function-key macros, namely <xcvrcommand:
'KY text;> (note the ' ) - but I don't know whether you can use this in
combination with other substitution macros, or whether you can embed
control characters in the text.
73,
Rich VE3KI
NR4C wrote:
There was a recent post on a reflector (don’t know which one) that listed
n1mm function key macros for sending FSK using KY commands I think. It
didn’t seem to require any interface other than usual serial cable. I am
interested in this information.
If this will work with DX Labs as well, please include that info.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
