Hi Bill, Well I just checked it out here and sure 'nuff, it works. On
page 36 of the K3s manual (page 34) of the K3 manual the setup is
described. The K3 doesn't care if the excitation comes from the
computer via the KY command or from the paddles so have a ball my
friend. You can use the CW macros on RTTY. I do not have n1mm but did
all of my testing with HRD's DM780 using the KY command. RTTY without
an interface.... works for me!
Jim, W4ATK
On H/11/2015 11:50 AM, Bill Conkling wrote:
There was a recent post on a reflector (don’t know which one) that listed n1mm
function key macros for sending FSK using KY commands I think. It didn’t seem
to require any interface other than usual serial cable. I am interested in
this information.
If this will work with DX Labs as well, please include that info.
Thanks for your time.
…bill nr4c
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
