Hi Jack,

I apologize for any consternation this has caused you. 

Since multiple components burned through the LPF  PC board, that is major 
damage and would require replacement of the whole LPF board, which is a major 
cost component of the amp. (Taking out this board and replacing it requires 
disassembly and reassembly of a major portion off the amp.)  The repair cost 
also includes the tech time to diagnose, disassemble, repair, reassemble, 
retest and do full production TX burn-in of the amp on all bands.

Component failure like this can occur in any manufacturer's radio or amplifier 
for many reasons, such as power line surges, nearby lightning strikes, 
operating with excessive SWR, transmitting into a wrong antenna etc. You do not 
need to be operating on a particular band, or even have the amp or radio on to 
incur lightning damage. This can also cause partial damage to components that 
then shows up as a failure later after additional operation. 

As a side note, every year during lightning season we see a significant 
increase in all sorts of 'interesting' repairs sent in to us on all of our 
products. Many times the user is not even aware that a strike occurred 
somewhere nearby while they still had their antennas connected.

I'll review your repair report with our techs to make sure we didn't over 
charge for anything. I'll also check to see if they mis-identified which band 
the destroyed LPF components were from.

73,
Eric
elecraft.com
_..._

> -----Original Message-----
> From: Elecraft
> [mailto:[email protected]] On
> Behalf Of w4grj
> Sent: Thursday, November 12, 2015 7:14 AM
> To: [email protected]
> Subject: Re: [Elecraft] KPA500 troubles
> 
> I need to correct the information on the repair
> cost
> 
> It was $615 with shipping not $650 as I previously
> reported.
> 
> Jack W4GRJ
> 
>> On Wed,11/11/2015 12:10 PM, W4GRJ wrote:
>> Got the KPA500 back from Elecraft.
>> Problem found: L22 and other components in the
> 60M low pass filter 
>> circuit burnt through the LPF PCB.
> 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]

Reply via email to