Frank,
There is a ground screw on each box of the K-Line, use it to hold a ring
terminal. The K2/100 also has a grounding screw. With the KX3, you can
put a ring terminal under one of the thumbscrews.
Which piece of Elecraft gear do you have that is lacking such a screw?
The proper answer to your question is transceiver dependent.
73,
Don W3FPR
On 11/18/2015 3:45 PM, Frank wrote:
I am a firm believer in a good ground for ANY transceiver, but need advice:
Where would be the best location (internal OR external ) to install a small
bolt for attaching a ground rather than having to us a “clip” attached to a
ground.
Thanks, Frank Sharit, W6DHN
Sent from Mail for Windows 10
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
