Larry,
The K3 will set the mode, frequency, etc. of VFO B the same as VFO A if
you tap A->B twice.
The K3 *can* transmit cross-mode if you set it up as indicated on page
36 of the manual.
With cross-mode operation possible, it is not desirable to set all
parameters of VFO B to the same as VFO A unless the operator intends to
do exactly that. Thus the double tap is required.
73,
Don W3FPR
On 11/19/2015 2:41 PM, Larry Gauthier (K8UT) wrote:
Tom,
When you tap/hold the <SPLIT> button, watch the K3 display to see if
you get the error message "SPL N/A" (Split Not Available ?). This
message appears when VFOb is set for a different mode than VFOa. To
recover I tap the <A->B> button (which forces VFOb to VFOa's frequency
and mode) and then re-tap/hold <SPLIT>.
Not sure if this is a Bug or a Feature. Would I ever want to be split
cross-mode? I would prefer if the radio forced the modes equal and
then performed the split operation rather than present me with an
error message.
-larry (K8UT)
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
