Hi Dave, and to the masses of readers we can hear breathing in the background...
I've surely done that myself, once with the equipment out and ready to ship before logic gained the upper hand and I started checking cords and connectors, finally detecting a male BNC on a cord with a retracted center pin. Sound familiar? :>) So many of us have had experiences like this. Cord goes bad and to start off we spend time trying to figure what's the matter with the box, the K3, the transverter, etc. One local ham went nearly nuts thinking his box had been supplied with non-standard type F female chassis connectors until a friend discovered that the male F connector in question had not been threaded in the manufacturing process ! That story was source of a lot of local ham laughs. Carefully checking the cords and connectors *first* seems to be counter-intuitive. While logic says that connectors and wire in the cords take all the mechanical abuse, our gut lurch is elsewhere. Maybe it's because making cords is such a royal pain in the *ss and our subconscious is rebelling against making another jumper. I share your pain. Maybe half the time I take advantage of experience and go after the cords first off. My personal gut lurch is still, "What the &&$#@$$ is wrong with the <insert box name> now !!!" 73, Guy K2AV On Saturday, November 21, 2015, Dave Sergeant <[email protected]> wrote: > And it turned out to be the cable from the K2 to the transverter. The > pin of the BNC plug at the XV50 end had pushed back so not making. > Together with the BNC/phone adaptor at the K2 end which is not the best > arrangement. I obviously need to make up a couple of proper phono-BNC > cables. > > I assume the BNC sockets on the XV50 are 50 ohm variants. I know the > pin diameters of 50 and 75 ohm are supposed to be compatible but maybe > that on the off the shelf BNC lead I used, presumably 75 ohm, has > thicker pins which caused the issue. > > 73 Dave G3YMC > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
