The question involved the K3, not the K3S. In the K3, there is an
RS-232 port rather than a USB connection - no soundcard in the K3 - at
least until the KIO3B option is available, and then more confusion will
be present and will result in asking if the owner has the KIO3B or the
K3 original KIO3.
Your answer is correct for the K3S, but not for the K3.
The fact that he specified a USB to serial cable instead of just a USB
cable tells me that he has a K3.
73,
Don W3FPR
On 11/22/2015 3:03 PM, Bob McGraw - K4TAX wrote:
I suggest connecting the radio to the computer via the single USB
cable. It handles the audio and the radio commands for CAT control.
The SignaLink USB is not needed nor preferred in this case. Configure
the FLDIGI application through the various menus in the software for
the radio using the HAMLIB menu in the application.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
