The K1 should develop greater than 5 watts on any band as long as the
power supply during transmit is greater than 12 volts.
I suggest turning to the Troubleshooting section of the Owner's manual
and doing the Transmit Signal Tracing procedures to determine which
stage is failing. Once that stage is located, we may be able to help
with further troubleshooting of that particular.
73,
Don W3FPR
On 11/23/2015 11:28 AM, Gee wrote:
What should the power output be from a K1 set to maximum power on 15 meters? I
can only get 2 watts. This seems too low. With the same K1 and a 40/20 module I
get 6 watts on both bands. I've checked the 30/15 module for any errors but it
looks good. 30 meters produces 6 watts. Any suggestions where to look? Thanks
all!
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
