Charles, I believe it’s pretty simple: Go wherever you want on a particular band, set the mode you want memorized, press V>M, and then press the M1, M2, M3, or M4 memory bank you want it held in.
To go back there, get on the proper band, press M>V, then whatever memory (M1…) you want. Jim / W6JHB > On Wednesday, Nov 25, 2015, at Wednesday, 10:44 AM, [email protected] wrote: > > > > Just got my K3S yesterday and spent most of the night setting up the > menu and config selections. On Page 16 of the manual, it states that M1 > - M4 can be used as "per band" memories that can be used to set up CW > and SSB frequencies for each band. Unfortunately, I can't find more > detail on this as I scan the manual. Can someone help with the procedure > to establish M1 - M4 mode specific memories with a band? > > Also, my K3S Config menu does not have a BAT MIN position. Has it been > removed from the Config Menu system? > > Lots to learn. > > Charles K5UA > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
