Just wanted to share this tip from Al, as it worked. Although, I started by reducing the polling by 50% first, and that did it. Ran a bunch of CQs with quick TX/RX switching and all N1MM+ functions running, and no freeze ups. Still don't know what path switched though on three of those hang ups over the weekend when I saw my TX signal in the P3 without the P3TXMON.
Thanks for the info Al. 73 Gene N9TF K3S 10057 -----Original Message----- From: Al Lorona [mailto:[email protected]] Sent: Tuesday, November 24, 2015 7:56 PM To: Gene Gabry Subject: Re: [Elecraft] P3 Showing Transmit Signal Gene, you can tell N1MM+ to reduce the Radio Polling rate. Go to Config --> Configure Ports, Mode Control, Audio, Other... On the Hardware tab, click on the Set button for your K3 port and then select "100% Slower" from the Radio Polling list. This may help. R, Al W6LX ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
