Hi Fred, Config SQ main and sub are set to 00. Both main and sub act like regular RF gain going from 0 to full on but both still have dead spot around 1 o-clock. Not causing a problem but would like to eliminate it. Still on the bottom of the learning curve of this radio but learn something new every day. Thanks for the reply. 73, Earl K4KAY
-----Original Message----- From: Cady, Fred [mailto:[email protected]] Sent: Monday, November 30, 2015 5:47 PM To: efortner; 'Elecraft Reflector' Subject: Re: [Elecraft] RF/SQL dual control Hi Earl, Check your Config menu SQ MAIN and SQ SUB. If SQ MAIN is set to =Sub Pot the control will act as a squelch control. Also tapping 1 in the SQ MAIN menu can choose between FM or ALL mode squelch. Cheers and 73, Fred KE7x For all KE7X Elecraft books, see www.ke7x.com ________________________________________ From: Elecraft <[email protected]> on behalf of efortner <[email protected]> Sent: Monday, November 30, 2015 3:31 PM To: 'Elecraft Reflector' Subject: [Elecraft] RF/SQL dual control I don't know what changed but the dual RF/SQL control for main and sub receiver cuts out at approximately 1 o-clock position just like a wiper not making contact on a carbon pot for about 1/8 inch movement of either the large or small knob. The radio is only several months old and I don't think the control is the problem. Any Ideas. Radio K3s serial number 10326 Earl, K4KAY ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
