What you both neglect to mention is how you are keying with NL+? It makes a difference. For keying my K3, I use the DTR line. I have tested sending CW, with the default weight setting, up to about 115 wpm and from 20 wpm up to the max of my K3, in my opinion, the NL+ weight maintains perfect weight/spacing up to that speed.
So what do you use for keying NL+ and what rig are you using? 73, Tom - W4BQF -----Original Message----- From: Elecraft [mailto:[email protected]] On Behalf Of Brian Hunt Sent: Friday, December 4, 2015 10:34 AM To: Fausto Coletti Cc: [email protected] Subject: Re: [Elecraft] N1MM CW issue I think the dits that N1MM makes are too short, at least to my ear. I set the CW weighting in N1MM 10-20% heavier and that seems to help. I never get much above 32 won but it seems fine there. The CW weight setting in the K3 menu only affects paddle input. 73, Brian, K0DTJ > When I select a speed higher than 28-30wpm, the weighing between > points and lines changes and, at 40wpm the transmitted message becomes incomprehensible. > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
