I am talking about the RX decoding. I would have no real way of
knowing which the sender is using. I guess to be more precise I was
using Writelog/MMTTY for decoding, however I did watch the K3 display
every now and then. The decode on the K3 was just as accurate. I was
sending FSK.
Rich
On 12/7/2015 3:30 PM, efortner wrote:
Are you using afsk or fsk?
Earl, K4KAY
On 12/7/2015 3:30 PM, efortner wrote:
Are you using afsk or fsk?
Earl, K4KAY
-----Original Message-----
From: Elecraft [mailto:[email protected]] On Behalf Of Rich
Sent: Monday, December 07, 2015 12:19 AM
To: [email protected]
Subject: [Elecraft] New K3SYNA and RTTY
I am seeing dramatic improvements in weak signal RTTY decoding.
Are other K3 RTTY contesters out there seeing the same remarkable
improvement?
Rich
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
