Start with the basics - disconnect everything other than the power and a
dummy load to the K3.
Then power it on.
If all is well in that basic configuration, then start adding the extra
things one at a time to find out what is creating the problem.
If the basic K3 still responds with a blank LCD screen, then try an
EEINIT. Hopefully you have saved a configuration file so you can
restore the configuration data after the EEINIT - if not follow the
calibration steps in the manual to get back to an operational state.
If that does not help, contact Elecraft support.
73,
Don W3FPR
On 12/12/2015 9:24 PM, Craig Wissman wrote:
An unpleasant surprise. The unit has been covered and unplugged since Feb
2015, no ant. No heat, cold, moisture...
I wanted to check out the 10 meter contest Dec13 utc tonight.
My Astron RS- 35m says their is voltage. This is a like new little used
factory built unit.
Not seeing any help in manuals. Bummer.
Open to suggestions to get it back. All I see is the orange screen with no
data.
Craig WF6Q
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
