I had a similar problem a month or two ago. I had upgraded my
synthesizer back in February. It turns out I had not fully seated all
of the TMP connectors on the new KSYN3A. It worked great for months,
even running mobile for several QSO parties, before I had the problem.
So, check those TMP connectors on your synthesizer board.
73, Alan N5NA
On 12/14/2015 2:15 PM, [email protected] wrote:
Message: 12
Date: Mon, 14 Dec 2015 11:56:13 +0000
From: Colin Thomas<[email protected]>
To:"[email protected]" <[email protected]>
Subject: [Elecraft] K3 - No RX/TX
Message-ID:
<CAHMNvmgJGBGZ2Y-MLK=nmvjupga_9jk7zwrxd+zldecb_+m...@mail.gmail.com>
Content-Type: text/plain; charset=UTF-8
Hi all,
Before I bother the good people at Elecraft support I would like some
thoughts on the above problem.
I have bulit and used K3 s/no 8943 for the past 8 months or so but a couple
of days ago it stopped both transmitting and receiving. Yes I do have an
antenna on it and my old FT1000MP works fine.
I have updated the firmware and carried out all the usual tests without
success. A reset and a check through both the Menu and Config reveals
nothing obvious and TX Test shows TX normal. Pressing TUNE shows 0 W.
Keyer works, sidetone works, I have AF but no RF.
Ideas please.
73
Colin, G3PSM
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
