-----Original Message----- From: Elecraft [mailto:[email protected]] On Behalf Of Jim Brown Sent: Tuesday, December 22, 2015 10:33 PM To: [email protected] Subject: Re: [Elecraft] RFI in audio chain >Yes. I will again strongly urge Jan to STUDY my tutorial on Power, Grounding, and Bonding for ham radio. > http://k9yc.com/GroundingAndAudio.pdf If equipment in the shack was properly bonded, removing that audio cable would not have solved the problem (and >there would have been no problem).
73, Jim K9YC Good study material for all to absorb! I would only add one additional to-do. Check all your bonds, especially outside ground bonds, annually. Even though you did a good job of bonding connections, oxygen oxidizes, in time. Speaking from experience :) 73 Gene, N9TF ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
