Larry,
To work with the KIO3B you would eliminate the soundcard that is
currently being used for the linein and lineout - it would also
eliminate one USB to serial adapter, but yes, you would have to
eliminate the Linein to the K3 (lineout can still work).
Since you already have your system running, and you already have the
investment in the soundcard and USB to serial adapter, I would suggest
that you not upgrade until those devices fail for you.
73,
Don W3FPR
On 12/26/2015 11:42 AM, Larry Libsch wrote:
Group -
I'm wondering whether an upgrade to KIO3B would be a step
forward or a step backward for me. My current setup, which works FB,
uses two outboard USB sound cards. One outboard sound card runs CW
Skimmer using a Softrock SDR, K3IF out, and one laptop USB port. The
second sound card does digital modes and, having left and right
channels, allows me to work RTTY SO2V in N1MM+. It uses the K3 line in
and line out ports and a second laptop USB port. A third laptop USB
connects the laptop to the K3 RS232 port for radio control and
logging. LP Bridge creates the virtual com ports that make the K3
logging software and sound cards work together. I use DXLab for
routine logging, N1MM+ for contest logging.
My reading of the available info about the KIO3B is that when
the USB port in the KIO3B is connected to a radio, the line in, line
out ports will be disabled. How would I make my setup work with the
KIO3B?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
