Hi again -
I'm configuring my new P3, and have one big question: is there a way to make "global changes". To expand: . I set up 20 meters to show S units (LvL Mode=S Units); a Ref Lvl from S0 to S9; Average = 5; Span = 20 khz, and apply that all to FN1 . I then set up 20 meters to show S units (LvL Mode=S Units); a Ref Lvl from S0 to S9; Average = 5; Span = 100 khz, and apply that all to FN2 That all works perfectly, and toggles between FN1 and FN2 is great. But, when I go to any other band: . FN1 and FN2 toggle correctly between 20 khz and 100 khz, the screen still displays S units; and the Average remains at 5. . But, on all bands except 20, where I configured the P3 , Ref Lvl is way off, with S5 displayed at the bottom with +30 at the top of the screen. Desired State: What I would like is for the P3 display to appear the same on all bands. So, is there a way to apply configuration changes globally to all bands, or do I have to manually set Ref Lvl on each band? Thanks -Ferris NB6T- ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
