Thanks Don - I made the change on all bands, and now the P3 displays the same on all bands. 73 -Ferris NB6T-
-----Original Message----- From: Don Wilhelm [mailto:[email protected]] Sent: Saturday, December 26, 2015 3:15 PM To: Ferris Jennings; [email protected] Subject: Re: [Elecraft] P3 Config Question Ferris, Many settings are per band - because what works fine on one band does not work well for all bands. There are other settings that are global. I believe those settings you have cited are per band. Set them for the optimum on each band. 73, Don W3FPR On 12/26/2015 6:03 PM, Ferris Jennings wrote: > Hi again - > > > > I'm configuring my new P3, and have one big question: is there a way > to make "global changes". > > > > To expand: > > . I set up 20 meters to show S units (LvL Mode=S Units); a Ref Lvl > from S0 to S9; Average = 5; Span = 20 khz, and apply that all to FN1 > > . I then set up 20 meters to show S units (LvL Mode=S Units); a Ref > Lvl from S0 to S9; Average = 5; Span = 100 khz, and apply that all to > FN2 > > > > That all works perfectly, and toggles between FN1 and FN2 is great. > > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
