Hi all, We've been testing an experimental (field-test) KX3 firmware release that has the following features:
- Both PSK31 and PSK63 modes - Up to 15 W power output (all modes) on 80-20 meters - Increased power output on 4 meters (with KX3-4M module; some units were not making target of 2.5-3.0 W) If you'd like to try this release, please email me directly. I'll take the first 15 or so. If I don't send you the new firmware today, hang in there -- it should be beta in a week or two. Note on 15 W output level: This requires a power supply voltage of 12.8 V or higher on key-down as indicated by the KX3 itself (on the VFO B display). All of the usual firmware protections apply, i.e. the KX3 will roll power back to a lower level if necessary to keep current drain and temperature within a safe range, or if supply voltage is too low. 12 W max is the generally recommended level, so 15 W should be used only when really needed. And again, this is experimental. 73, Wayne N6KR ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
