David,
I do not use a MAC nor do I have the K3S, but from what I understand,
you should have the "RS-232 Y" cable to activate the SteppIR controller
between the cable between the K3S and the P3 XCVR connector. That
should allow the SteppIR controller to hear the band data information.
73,
Don W3FPR
On 12/28/2015 5:09 PM, David Ahrendts wrote:
If you’re running a K3 or K3S with a SteppIR controller and MacLogger DX, I’ve
got a question for you: RS232 frequency data from my P3 is split with a Y-cable
between the SteppIR controller and the Elecraft KUSB cable that runs to my Mac
Mini. However, to allow MacLoggerDX to initialize with the K3S, I must briefly
disconnect the SteppIR controller (MacLoggerDX finds the K3S no available),
allow MacLoggerDX to initialize with the K3S, and then re-connect the SteppIR
controller to the Y-splitter cable.
Anyone have a work around? They do share frequency data very efficiently once
initialized.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
