Hi Michael. You bet. See ab2tc.com for a couple of pictures of my installation. I apologize for the immaturity of the web "site". Also search this reflector for my call sign AB2TC and you will find valuable information on how I have it set up. My setup is not the only option; others have successfully used internet CAT6 cable to connect both serial connection and the AUX channel.
AB2TC - Knut Michael Blake wrote > Has anyone remotely mounted an Elecraft KAT500 in a weatherproof > enclosure? > > My current antenna situation is an MFJ-994BRT fed with 100 feet of 9914F > and then either a 30’ length of 9913F or 450 ohm ladder line to any > variety of 60 foot dipole antennas. I would like to replace the tuner > with a KAT500 but unsure of control circuits other than 12vdc power which > would be provided over the 9913F coax feed line. > > The radio is a KX3 driving a modified ALS-600 with 500 - 600 watts to the > feed line. > > Michael Blake - K9JRI -- View this message in context: http://elecraft.365791.n2.nabble.com/Remote-a-KAT500-tp7612584p7612590.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
