Olli,
I think something like that would add confusion to the user interface.
In other words, you have a unique situation that is only applicable if
split is on a different band, but the display will not reflect the
status of the normal RX and TX parameters when in split.
73,
Don W3FPR
On 1/16/2016 7:51 AM, Oliver Großmann wrote:
Hi elecraft team, hi list,
I'm thinking again on improvements for SO2V operation using a K3 with
sub RX.
In my opinion operating will be much smoother if TX on 2nd VFO is
possible.
I do know it is technical not possible to transmit on the frequency of
the sub RX if it is on a different band. Due to the fact the sub RX is
as powerful as the main RX I do have an idea.
If split is disabled and both VFOs are on different band (normal
operation) VFOA frequency, mode, filter bw etc. are shown as usual.
If the operator enables split on different bands, swap RF paths like
pushing the A/B button but dont swap the displayed information on the
LCD, CAT information and left/right audio and enable the split icon on
the LCD.
Of course this aren't all points which need to be considered and with
PC control it is possible to operate like this, but it would be much
more robust against operator errors if radio and software setting are
consistent.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
