Hello,
My Dad picked up a K3 that is a late number 9xxx it had a sub receiver and both synthesizers are the KSYN3A. A little history on the rig first, Original owner bought as 100 watt kit and installed the sub receiver. Second owner installed a couple filters on the main board and the antenna tuner KAT3 and my Dad got from him. Anyway, my Dad and I were going through it and could not get anything out of the sub receiver, set speakers to 1 and now we get static so that's a good sign. Figured it was the settings so checked KRX3 and set it to Ant-BNC and hooked up to the AUX BNC to the signal generator. Went through setup with K3 Support from Elecraft and still nothing. Checked all connections on sub receiver and noticed that the Green LED on the sub KSYN3A was not lit like on the main receiver KSYN3A. Swapped them and appears that the problem is on the board because now I have a green light on the sub (originally main) and nothing on the main (originally sub). Went to check syn status and it showed PLL instead of SYN1 OK and SYN2 OK. No receive on main or sub. I put them back the original way and main works but no sub Status says SYN1 OK and SYN 2 OK but no green LED light on the sub board. I ordered a new KSYN3A for the sub so hope that works but still have no idea why no green LED but says SYN2 OK. Any thoughts on my long winded comment? 73, Jeff ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
