I'll second that. I have K2 #380 and changing the
AF pot wiring a couple of years ago cured all of
that AF gain scratchiness.
Phil W7OX
On 1/21/16 9:52 PM, Vic Rosenthal wrote:
If it's a REALLY old K2 there is a modification that you should perform in the
wiring of the control as well as replacing it. It's on the Elecraft website.
Vic 4X6GP/K2VCO
On 21 Jan 2016, at 11:36 PM, Don Wilhelm <[email protected]> wrote:
Jacob,
If the AF Gain is scratchy when turned, the best cure is to replace it. Those small pots
are sealed, and I doubt that you could get any DeOxit into the body of the control. Even
if you can get some inside the pot, the "cure" will not be long lasting, you
will eventually have to replace the pot, so 'bite the bullet' and do it now.
The carbon (or other material) that forms the resistive layer over which the
wiper rides can become pitted and work with extended use - there is no way to
fix that other than replacement.
73,
Don W3FPR
On 1/21/2016 10:53 AM, Jacob Chambers via Elecraft wrote:
Hello;
I have an older K2 that has developed a raspy, scratchy sounding CW note on
receive. All bands affected. The transmit sidetone is clean as a whistle.
Headphones or external sparker are the same. Seems like there is some popping
and scratching when I bump or play with the AF gain control. Could that be it?
And I'm thinking of spraying with DeOxit contact cleaner. Is that OK? Thanks!
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
