Myron,
It will already do that. You apparently have the VFO OFS menu parameter
set to OFS - change it to OFF and you will have your wish.
Note that if you have VFO OFS parameter to OFS, the step size will vary
by the value set in VFO CRS. The size setting is per mode.
See those menu items in the manual.
73,
Don W3FPR
On 1/22/2016 9:54 AM, Myron Schaffer wrote:
I know this may be a nit but it would be neat if the VFO B knob would increment
without rounding off the frequency. For instance, I participate in the foxhunts
and find the fox. Then I use the DW SUB function and dial in the fox with the
VFO A knob. If I use the VFO B knob it rounds off the decimal place and
overshoots the target freq. If it were set to just increment of 1.0 I would
land exactly where I want but it rounds off the freq and throws me out into
left field.
Thanks.
Myron WV🌀H
Printed on Recycled Data
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
