Hi Jim,
I've always wondered why, for CW, with the K3 you would not want to set
the RX EQ to peak at the CW PITCH setting?
On 1/24/2016 1:40 PM, Jim Brown wrote:
I generally set RXEQ flat (no boost or cut) for general operation on
mains power in both K3 and KX3.
BUT -- if you're going backpacking, you'll reduce battery drain a bit
and increase audio headroom by setting the four lowest frequency bands
for maximum cut. This does the same thing on RX that it does on TX --
it gets rid of low frequency components of voice that make no
contribution to intelligibility but burn power.
73, Jim K9YC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
--
73,
Gary K9GS
Greater Milwaukee DX Association: http://www.gmdxa.org
Society of Midwest Contesters: http://www.w9smc.com
CW Ops #1032 http://www.cwops.org
************************************************
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
