WSJT-X 1.6.0, PTT method = CAT, VOX enabled on K3S, 50w pwr but no envelope on the P3
-----Original Message----- From: Elecraft [mailto:[email protected]] On Behalf Of Tom Crayner Sent: Monday, January 25, 2016 16:19 To: [email protected] Subject: Re: [Elecraft] K3S and WSJT-X Ian, Which rev level of WSJT-X are you trying to use? I seem to recall 1.5.x had some issues with Hamlib and as a result some of the PTT code was broke. If you are running 1.6.0 I think the Hamlib stuff is fixed and you can use K3/KX3 as a rig and then set PTT to CAT. If you plan on running DX Commander at some point you can install it, configure it to mange the radio under the config->port options of DX Commander and then point WSJT-X to it by selecting DX Commander as the "rig" in Settings->Radio. Then DX COmmander does the heavy lifting and avoids the broken Hamlib piece. This should work in 1.5.x and 1.6. Tom (W2YF) On Mon, Jan 25, 2016 at 11:52 AM, Ian <[email protected]> wrote: > I have a single USB cable between the K3S and the laptop and no > problem decoding JT65 signals with DATA A. "CAT Control" is set for > COM4 and 38400-N-8-1. Any hints on setting the "PTT Method" parameters? > > > > 73, Ian N8IK > > s/n 10111 > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ----- No virus found in this message. Checked by AVG - www.avg.com Version: 2016.0.7357 / Virus Database: 4522/11485 - Release Date: 01/25/16 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
