Thanks for the hints. The problem went away after I simply swapped the KNB3
boards between the main and KRX3.
73
Johnny VR2XMC
寄件人︰ Klaus Koppendorfer <[email protected]>
收件人︰ Johnny Siu <[email protected]>; Elecraft <[email protected]>
傳送日期︰ 2016年01月29日 (週五) 7:33 PM
主題︰ AW: [Elecraft] ERR BP3 and ERR IF2
Clean the contacts from frontpanel to mainboard
-----Ursprüngliche Nachricht-----
Von: Elecraft [mailto:[email protected]] Im Auftrag von Johnny
Siu
Gesendet: Freitag, 29. Jänner 2016 11:06
An: Elecraft <[email protected]>
Betreff: [Elecraft] ERR BP3 and ERR IF2
Hello Elecrafters,
I have just done the KBPF3 modification in the sub receiver KRX3. However, upon
turn on the K3, I got the error messages ERR BP3 and ERR IF2.
I tried to access the CONFIG menu. I can get KIO3 and KPA3 but not KNB3. In
other words, KIO3 is after by KPA3 in the CONFIG menu and no KNB3.
Any advice before I shoot an email to elecraft support.
73
Johnny VR2XMC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
