Thanks Dick but a switch toggle won't work - the result is indeterminate unless there's a way to reset to a known value first. Is there a key sequence that will place the subreceiver antenna selection in a known state?
Barry N1EU On Tue, Feb 2, 2016 at 1:34 AM, RIchard Williams <[email protected]> wrote: > Barry, > > Yes, there is a command that will do exact what you want. If you take a > look at the Programmer's Reference (which you can download on the Elecraft > site), you will find the command on page 23 in Table 7. The command is > SWT25; > > Keep in mind this is a "toggle" command. The command will toggle the Sub > RX Ant on and off (just like tapping the RS ANT button on the K3). You > will probably want to use this command in combination with other commands > to make up a macro for whatever you are trying to accomplish. > > Dick, K8ZTT > > > > ------------------------------ > *From:* Barry N1EU <[email protected]> > *To:* elecraft <[email protected]> > *Sent:* Monday, February 1, 2016 6:02 PM > *Subject:* [Elecraft] K3 macro for Subrx antenna? > > Does anyone know a way to program a K3 macro to set the Subreceiver antenna > selectively to Main or Aux? > > Thanks & 73, > Barry N1EU > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
