It just could be a mike issue that EQ won't correct. Otherwise, the
values should show positive or + amounts starting with about 200 Hz.
You might also check to see the previous owner had not set other values.
73
Bob, K4TAX
K3S s/n 10163
On 2/3/2016 12:09 AM, Steve Wilson via Elecraft wrote:
Hi all,
I have a newly acquired slightly used K3. Feedback on my voice audio quality
is that it sounds tinny with no low or mid range. Unfortunately, the K3 manual
really doesn't provide much guidance on how to adjust the transmit EQ other
than the mechanics of what buttons to push. If I need to increase the low and
mid, does this mean I should increase the values of the first half of the 8
settings and decrease the second half..or something similar? It's been a while
since I've dealt with audio equalizers. I would appreciate any suggestions.
Thanks, Steve KG6HJU
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
