That would be inconsistent with the use of AN which selects between transmit antennas in K3/K3S equipped with a KANT3/KANT3A tuner.
The appropriate solution would be an entirely new command (RXA/RXA$) where RXA0; set the Main RX to Main antenna, RX1; set the Main RX to the RX Antenna, RXA$0; set the Sub RX to use the currently selected Main RX antenna and RXA$1; set the Sub RX to use either Aux or the *unused* (non-transmit) port on the KANT3. In other words, 0 = RX Ant OFF, 1 = RX Ant on based on the user's hardware configuration. 73, ... Joe, W4TV On 2/3/2016 7:25 AM, Barry N1EU wrote:
This is a straightforward feature request: implement the $ version of the AN command so that AN$1; sets subreceiver to Main Ant and AN$2; sets subreceiver to AUX 73, Barry N1EU ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
