Jeff,
Connect a dummy load rather than the antenna and try it at 10 watts. If
the problem is not present, you can blame it on RF-in-the-shack being
picked up by the audio input or your computer.
If you do have an RF problem, the cure is in the antenna field. Better
common mode chokes to keep the common mode current at bay.
73,,
Don W3FPR
On 2/5/2016 9:04 AM, Thorpe, Jeffrey wrote:
I've followed the directions in Fred Cady's book and the steps in the fldigi
manual for setting receive and transmit levels. (Use the 'tune' button in
fldigi, adjust computer output to 4 bars on ALC meter, keep mic setting where
I use for voice - 5) and all seems ok to this point. When I go to transmit
however, all bars on the ALC meter come on.
The only thing different is when using 'tune' I have output set to 0 watts.
When transmitting it's set to 10 watts. Any ideas?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
