That answered a question I took off list, will my 12 KHz filter work, looks like I will be testing this... -- 73's, and thanks, Dave
For software/hardware reviews see: http://www.nk7z.net For MixW support see: https://groups.yahoo.com/neo/groups/mixw/info For SSTV help see: http://groups.yahoo.com/neo/groups/MM-SSTV/info On Fri, 2016-02-05 at 17:00 +0000, [email protected] wrote: > Thanks Wayne, the software blanking improvement on CW using FL1 13kHz > filter set to 400Hz is remarkable because not only does it suppress > strong electric fence pulses here for the first time in years but > also cleans up the NB function when FL1 is enabled. I used the 13kHz > filter because it was in my K3. DSP 2-3 or 3-3, IF Blanker OFF. > The main improvement is on the DSP blanker, the hardware blanker > remains only mildly effective on strong electric fence pulses and is > little use if any with FL1. > Some overload on strong signals as expected because of wide roofing > filter. Setting the bandwidth to activate either my 500 and 200 > filter each side degrades NB performance to previous. > I will try with a 6kHz filter in due course. > John G3PQA > (K3 1123) > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
