Bill, Do you have TECH MD set to ON?
Wayne N6KR On Feb 7, 2016, at 8:55 AM, Bill Cotter <[email protected]> wrote: > Hi, > > I just updated my K3 (sn#3082) to the (MCU 5.38, FPF 1.25, DSP1 2.86) and > performed the required TX Gain Calibration. The 5W calibration matched the > Bird wattmeter on each band, but the 50W was over 50W on each band. > > I wanted to calibrate the K3 wattmeter so I could repeat the process, > however, when holding the CONFIG button, then seeking WMTR, it never appears. > I see VFO OFS then XV1 ON, and no WMTR in between. > > Suggestions?? > > Thanks - Bill N4LG > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
