Rich, Yes, I can hear the audio on the K3 speaker. I thought I should hear it also on the PC speaker since HRD provides for remote operation of a K3 which would necessarily include audio.
Perhaps I expected more than was warranted. Man, thanks for your response. Jim - W4RKS >The PC speaker is connected to the PC's >internal sound card. For data >modes you said you are using the USB codec in >the KIO3B, which is not >connected to the PC speaker. Try using a >speaker connected to the K3's >SPKR output (or the internal speaker) to >monitor the audio instead. ___________ >* Using a K3 *>* KIO3 B (The new board) *>* "Y" cable connected to P3 via the RS232/P3 connection *>* USB cable from the K3 USB to a Windows 7 (32) PC USB port *>* The P3/Config RS232 is set to "USB" *> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
