It is a rigctl command to clear SPLIT mode. S, set_split_vfo Set split mode, 0 or 1, and transmit VFO.
S 0 VFOA turns off split mode and sets transmit VFO to VFO A So I guess the better question is if you are in split mode, and transmitting (VFO B), and the KX3 gets a command to turn off split mode, and go to VFO A, what happens? Does it keep transmitting but now on VFO A frequency ? Troubleshooting issues with WSJT-X and just trying to understand what is happening under the hood. -Kevin (KK4YEL) > On Feb 8, 2016, at 21:04, Don Wilhelm <[email protected]> wrote: > > I do not see the "S 0 VFO" command in the K3/KX3 programmer's reference. > Is this a command that is being issued to some logging program? > If so, that may be a condition of the logging program (or a bug). > > 73, > Don W3FPR > >> On 2/8/2016 8:43 PM, kevino z wrote: >> I noticed if my KX3 is in split mode, and transmitting, and the command S >> 0 VFOA. Is issued, the power level drops to zero. The very next time the >> transmission starts again, the power slowly increases from zero to whatever >> wattage I had set for power out. Is this some sort of safety feature? >> >> -Kevin (KK4YEL) >> >> No trees were killed in the sending of this message. However, a large number >> of electrons were terribly inconvenienced ! >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
