John,
That K3 internal soundcard should appear to the computer just like any
other USB soundcard. That can be computer dependent, so no specific
advice can be given.
Select that soundcard in your data mode application and you should be
"good to go" other than adjusting the soundcard levels.
Use DATA A rather than SSB because the K3 automatically turns off
compression and sets the TX EQ flat.
Adjust the soundcard output audio level to drive the K3 ALC meter to 4
bars solid with the 5th bar flashing, and you are ready to transmit.
Adjust the soundcard input level to suit a reasonable display on your
application's waterfall.
73,
Don W3FPR
On 2/11/2016 4:34 PM, John Shadle wrote:
I looked in the K3S manual, and the instructions on setting up data modes
(p. 33) fail to mention the use of the KIO3B internal sound card. Are there
instructions (erratum?) available on how to set up data modes (using DATA
or USB/LSB) with this new feature?
Probably a simple answer to this question -- I'm just having trouble
finding it.
Thanks!
-john NE4U
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
