Hi
I have noticed something strange with my K3 and am wondering whether it
is a bug, a feature or operator error.
I am using the K3 to send WSPR at 0.2W, band hopping but on almost
continuously on one band or another.
The driving program is WSTJ-X in WSPR2 mode with scheduling enabled.
Whilst it always works OK to start with and I get reports, I notice that
after it has run for a few 10s of minutes I get no reports. It is as if
there is no o/p from the K3.
If on the other hand I run at 2W and put a 10dB attenuator on the output
socket, it all seems to work as expected for as long as I run it.
So is this a known problem with the K3, a broken K3 or have I made a
mistake somewhere?
Thanks
Stewart/G3YSX
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
