Paul,
The ALC bars is not relevant when using FSK D (or PSK D), that is only
for soundcard driven data modes.
K3 Terminal is there for convenience, and while is does the job, it was
not intended to be a "logger", so no serial number incrementing is possible.
For FSK D, take a look at MMTTY - it can do both soundcard AFSK A and
FSK D if you build a "one transistor keying device" to 'wiggle' the FSK
IN pin on the K3 ACC connector.
73,
Don W3FPR
On 2/13/2016 10:01 AM, Peter Pauly wrote:
I'm using the K3 Terminal and FSK D mode for the RTTY contest and am doing
"okay" but have the following questions:
1. My ALC indicator shows 6 or 7 bars, more than I would like. Is there any
way to adjust the output in FSK D mode?
2. In the K3 Terminal, is there any way to have an incrementing serial
number (required in this contest)?
I usually use FLDigi which has that feature with AFSK, but I'm trying to
get the hang of FSK-D.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
