I tried it and it worked FB, only thing for an old CW op it was difficult
gettingused to sending a new CW character dit dit dah dah with terminates
theRTTY diddle immediately rather than to have it continue 5 seconds afterthe
last character completes.
73Dave -N4DB- K3s #10223
On Friday, February 12, 2016 9:05 PM, Wayne Burdick <[email protected]>
wrote:
FSK-D mode is perfect for casually dropping in on RTTY contests.
To receive RTTY directly on the VFO B display:
1. Tap DATA
2. Rotate VFO B to select FSK-D
3. Tap any switch to exit DATA setup
4. Hold TEXT DEC to turn on text decode
5. If you were using DISP to look at supply voltage, etc.,
that will override text decode, so tap DISP to exit
Then just tune in RTTY signals and watch the decoded text scroll by.
To transmit, you can use either a keyer paddle attached directly to the radio,
or a keyboard attached to a PX3 or P3, or use your PC keyboard from within K3
Utility or KX3 Utility.
Happy hunting!
Wayne
N6KR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
