Gerry,
Specific answers:
There is a TX DLY configuration menu item that can be used to set the
delay for the onset of RF - the default value is 8 ms.
The connector for KEYOUT is an RCA connector.
Both the Key and Paddle jacks are 1/4 inch phone jacks.
You would benefit by downloading the K3S manual to see the connectors on
the rear panel and also look at the list of CONFIG Menu items to get an
idea of how the K3S can be customized for your use. Normally the menu
defaults are usable, but better operation suited to your operating
preferences can be achieved by varying those parameters.
One thing I insist on changing for my personal operation are the AGC
Threshold and Slope parameters. If you want to see a discussion on what
happens when you change those parameters, look at the "Noisy K3" article
on my website www.w3fpr.com.
73,
Don W3FPR
On 2/15/2016 7:05 PM, Scott James via Elecraft wrote:
I am getting my K3S soon. Have been using Yaesu 1000MP and Ameritron AL82 with
1000MP set to semi QSK and it is OK.
To tun a K3 into an ANertiron or any non Elecraft amp semi qsk, are there any
setting I have to make and where would I find them?
Also, is the connector input for key out RCA connector and is the jack for the
paddle an RCA. Or?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
