Hajo,
Whatever you do, the skimmer screen shows on the screen what it is
'listening to'. So set the offset in the settings of skimmer so that
skimmer shows you what you hear in the KX3.
(I use the K3 with a real softrock and I can adjust the offset right on
the spot.)
Arie PA3A
Op 16-2-2016 om 14:33 schreef Hajo Dezelski:
Oh I forgot:
I use the Softrock-IF as Radio (model).
73 de
Hajo
DL1SDZ
---
Cela est bien dit, mais il faut cultiver notre jardin.
On Tue, Feb 16, 2016 at 1:08 PM, Hajo Dezelski <dl1...@gmail.com> wrote:
Hello,
using the Kx3 with CW skimmer and Aggregator 4.1 I got a message from RBN
" RBN calculated frequency offset has a maximum value of 1.6 kHz on 20
meters. Please calibrate your skimmer to reduce this offset to a value
between -0.1 and -0.1 KHz."
When I change the mode on the Kx3 from cw to usb the difference is reduced
to 1,0 khz.
Which mode should I use to be right on the frequency?
Or should I change within skimmer the Audio IF to -1600 Hz. and use CW. My
frequency offset in cw is 600 Hz.
Thanks for your advice
73 de
Hajo
DL1SDZ
---
Cela est bien dit, mais il faut cultiver notre jardin.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to p...@xs4all.nl
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
