My station has a lot of N connectors on HF and I find them easy to install on RG8 size coax. I recently installed BNC connectors on RG8X for my RX system, I was previously using UHF to BNC adaptors. It took me a little while to figure them out, but they are really not difficult either. I only purchase Amphenol and Andrew connectors.
John KK9A Gary K9GS garyk9gs at wi.rr.com Wed Feb 17 07:24:47 EST 2016 N and BNC connectors are also more difficult to assemble. Makes no sense to me. On 2/17/2016 12:41 AM, Jim Brown wrote: > On Tue,2/16/2016 6:59 PM, Clay Autery wrote: >> I've decided to replace the SO-239 bulkhead connectors for ANT1 and ANT2 >> with N-Connectors, but I don't want to de-solder the pigtails from the >> stock UHF connectors. > > Why? UHF connectors are generally superior at HF and low VHF. > > 73, Jim K9YC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
