Gary,
It does not really make that much difference - there are no
inter-dependencies. The assembly manual tells builders to build up the
K3S with the LPA first, then do the 5 watt calibration - that has
already been done for you in your K3S/10 Factory assembly. After that,
install the KAT3 (if you have it), and then install the KPA3, and then
do the 50 watt TX Gain Calibration. That order is not really important
because there is no direct relationship between the KAT3 and the KPA3.
You might want to check the K3S assembly manual and turn to the parts
after the 5 watt TX Gain calibration has been done and proceed from
there. I say that only so you have a sensible guide to completing your
assembly with the KPA3 and KAT3.
73,
Don W3FPR
On 2/17/2016 4:12 PM, Gary Smith wrote:
Just got my factory assembled K3s/10 delivered. I need to install the
100W amp and internal tuner. Seems like I'd want to install the amp
first.
Yes?
Thanks & 73,
Gary
KA1J
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
