Did you remember to connect the coax cable between IF IN on the P3 and IF OUT on the K3?
If so, check that cable for opens or shorts. 73, Ron AC7AC -----Original Message----- From: Elecraft [mailto:[email protected]] On Behalf Of Gary Smith Sent: Friday, February 19, 2016 1:55 PM To: [email protected] Subject: [Elecraft] K3s & CBLP3Y to P3 - no signal does follow VFO Hi, I just connected the CBLP3Y cable to the P3 & K3s. The frequency shows on the P3 & the SVGA monitor but I see no signals on the waterfall. It was working fine with the K3 when I disconnected it and it is now not working. I do have RS232 configured to USB and I have made sure the jack & plug have mated with a click on the K3. Ideas of what I need to do to get the waterfall working? Thanks & 73, Gary KA1J ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
