Today I installed a KRX3A in a K3S. Not my favorite day. On the plus side, I plugged the K3S in and everything seems to be working. Big grin! On the negative side.
1. I do not believe there is anywhere described installing the TMP cable between KREF3 J5 and KRX3A J82, other than in Figure 47. I didn't know which length TMP cable to use, so I used a 10" one. 2. I have a 5" TMP cable left over (I chose to go the Aux Antenna BNC Connector route). Is this expected? 3. I hate the way the KRX3A has to be blindly inserted onto the input/output connectors. I guess I got it right. 4. The config menu says that a KRX3 is installed (not a KRX3A). Is that ok? (latest firmware all around). All in all, a harrowing 4 hour experience I don't want to repeat. Hopefully the results will be worth it! Bob, W3DK ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
