David,
I don't have an answer for your question though well aware that
bandpass filter affect on use of K3 IF for transverters.
For Rx, if you have the KBPF3 installed, it will extend beyond 14.350
but unknown if that is true for Tx.
I use 28-32 MHz as IF for my VHF/UHF transverters up thru 1296. Many
are probably unaware that the K3 will receive up to 32-MHz in
transverter mode. However RF output drops off severely above
30-MHz. My 50w transverter output at 146.52 (IF=30.52) is 6w due to
low drive from the K3. At 146.000 output is 15w. At 145.800
35w. And 144.000-145.500 50w.
Use of my KX3-2M is for the full 144-148 MHz band, making it way more
usable as a multi-mode 2m radio.
But my use of the K3+ 2m DEMI transverter is primarily for the bottom
end 144-144.200. I have 2m FM radios for the rest of the band (and
the KX3-2M, of course).
73, Ed - KL7UW
http://www.kl7uw.com
"Kits made by KL7UW"
Dubus Mag business:
[email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
