VFO B tunes at the same rate as VFO A for a given mode. Assuming you're not using cross-mode, then you can just change the rate for A, and the rate for B will be the same.
Normal tuning rate is 10 Hz per step. Tapping RATE switches to 1-Hz tuning. Holding KHZ switches to coarse tuning. All will apply to both VFOs. To change the coarse tuning rate for a give mode, use MENU:VFO CRS. To change the total steps per VFO knob rotation, use MENU:VFO CTS (128 or 256 counts per turn). 73, Wayne N6KR On Feb 23, 2016, at 9:15 AM, "Tim Cook" <[email protected]> wrote: > Is there any way to change the tuning rate for VFO B? Using the dual watch > mode and trying to find where the dx is listening using VFO B is a little > difficult with such a slow tuning rate. I checked the manual and reflector > archives but cannot locate any information about changing the tuning rate, > maybe it's fixed at the 70hz per turn for VFO B. (at least that's what my > KX3 does). The other possibility is that I'm completely missing the boat on > this and am just not seeing it. > > > > Thanks > > Tim > > NZ8J. > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
