Yes, the issue is that after the P3 sends the UP7, DN7 command, etc. to
the K3 it doesn't receive the new frequency back from the K3 right away.
So when the #FXT1 command (go to fixed-tune mode) is executed it is
based on the old K3 frequency, not the new one.
Adding a delay in the Genovation keypad solves the problem because it
gives the K3 time to update the P3 with the new frequency before
executing the #FXT command.
Paul and I have been talking about it and may have come up with a better
way to do this. Stay tuned.
Alan N1AL
On 02/26/2016 09:05 AM, Paul Saffren N6HZ wrote:
Hi Dave,
The P3 does execute the commands one after another. The problem is likely
that the K3 commands take a little longer to execute and there is no waiting
in the P3 for the K3 to change frequency. In other words, the P3 executes
the serial commands in sequence. It gets to a K3 command (DN7, UP7 etc) and
simply sends that over to the K3. It then continues to execute the commands
in the macro. Using the P3 and/or K3 utility delivers the same results as
would any program (Python, etc) that does not query the K3 for a reply.
While adding a delay after the K3 commands may help, there is probably a
better way to do this. Let me think about it for a while.
Kind regards,
Paul
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3-v1-57-SVGA-v1-31-BETA-firmware-available-tp7614603p7614637.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
